Brands
 
Shopping Cart
0 items
 
Specials
 

230 Watt Portable RV Solar System

230 Watt Portable RV Solar System
Click to enlarge
Price: $1,022.70
Availability: 5
Model: USP1004
Manufacturer: Zamp Solar
Average Rating: Not Rated

Available Options:
Zamp SAE Battery Quick Disconnect Kit:
Zamp 15' Extension Cable:

Zamp 230 Watt 12.6 Amp High Power Folding Portable Solar Battery Charging System

The 230 watt portable charging system is rated at 12.6 amps per hour in direct sunshine. Expected amp output of 63 amps (winter) to 88.2 or more amps (summer) per day. This is the most powerfull portable solar system available for bulk charging the RV's batteries.

Zamp portable solar systems are shipped direct from the manufacturer via ground. During the busy season (May thru August) it is possible that some portable systems may be on back order and can take up to 3 weeks for delivery.

From the Manufacturer

The Zamp USP1004 is the "King of the Road". It doesn't get any bigger or better when it comes to portable solar. Built from two 115 watt solar modules the USP1004 produces a mind blowing 230 watts at 12.6 amps peak. This system provides plenty of power for large battery or small battery banks.

Green, Clean and Portable!
Fully assembled and ready to use! Zamp USP1004 portable folding solar systems feature monocrystalline solar panel technology. These ground mounted kits have adjustable tilt legs for optimum tilt angle and have a built in solar charge controller. The kit comes with 15 foot of cable with battery clamps and SAE connector for easy hookup, and can be folded up and stored safely in its padded carrying case.

When you arrive at camp the set-up process takes less than 5 minutes. Remove the solar panel from the carry case, unfold the modules, adjust the tilt legs and place on the ground in a sunny location pointing south or sout-west. Then connect the power leads to your battery. That's it!

Product Features

  • High efficiency monocrystalline solar panels
  • Built in the USA
  • 15' cable with fuse, battery clips and SAE connector
  • Heavy duty anodized aluminum frame
  • 25 year warranty (solar panel only)
  • Compact and powerful
  • New - adjustable hinged all aluminum support legs
  • Built in 5 stage PWM solar charge controller
  • Durable heavy duty storage/carry case
  • Closed dimensionn: 39.5" W x 88" L x 3.1" H
  • Open dimensions: 79" W x 44" L x 1.5" H
  • Weight: approx 47 lbs.

Downloads
280 Watt Portable Brochure
280 Watt Portable Warranty

Options
15 Foot Extension Cable
- The extension cable will give you an addition 15 foot of cable allowing you to park in the shade and place the portable solar system in the sun. The combined length of both the portable cable and extension cable is about 30'.

Battery Disconnect Kit - The new Zamp ZS-SolarPort is a 12 gauge battery quick disconnect kit that makes it easy to plug directly into your deep cycle battery in just a few seconds. This kit is a 12" bare wire harness (you'll need to buy ring terminals) that connects directly to your battery and an SAE type connector that matches up with all Zamp portable solar panels.The new quick disconnect system allows you a few installation options.

Battery Disconnect Option 1
Drill a hole in the battery box and install the round black female port with attached screws. Connect the red wire from the female port to the positive (+) battery post.
Connect the black female port wire to the negative (-) battery post.

In some cases the pigtail of the Zamp ZS-SolarPort may not be long enough to reach the battery posts. If this is the case simply add more wire with butt connectors.

Battery Disconnect Option 2
Use this option if you don't want to drill a hole in the battery box.

Route the battery connection pigtail under the battery box lid. Connect the red positive wire of the pigtail to the batteries positive (+) post. Connect the black wire to the batteries negative (-) post with ring terminals. Mount the SAE plug to the battery box or simply let it dangle in a convenient location.

Battery Disconnect Option 3
Drill a hole in the side of the RV just large enough for the roof sidewall port. Apply a bead of silicone around the back side of the port and fasten to the RV with screws. Route the battery connection pigtail to the battery compartment. You may have to lengthen the wires with butt connectors. Connect the red positive wire of the pigtail to the batteries positive (+) post. Connect the black wire to the batteries negative (-) post.

What's in the Box
1 - 230 watt portable solar charging system, charge controller, heavy duty balistic nylon zippered carry case and 16 foot battery connection cable with alligator clamps and SAE connector
1 - Owners/Users manual
Any options ordered

Notes from the Installation Team
For those who prefer a portable system over a roof mount solar system the Zamp 230 is the most powerful folding portable system available. This system can be used for bulk charging large or small RV battery banks while dry camping. We HIGHLY recommend securing the system to the ground with tent stakes or a dog/awing tie out stake and bungee cords

Security can be an issue with portable systems. Pick up a 15' or 20' chain or vinyl coated cable and a couple of small padlocks to secure the system to a trailer leg, tire wheel, the bumper of a vehicle or any other place a chain can be locked.

 

RV Solar Store © 2011-2019

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

230 Watt Portable RV Solar System
Click to enlarge
230 Watt Portable RV Solar System
Click to enlarge
230 Watt Portable RV Solar System
Click to enlarge
230 Watt Portable RV Solar System
Click to enlarge
230 Watt Portable RV Solar System
Click to enlarge
230 Watt Portable RV Solar System
Click to enlarge
230 Watt Portable RV Solar System
Click to enlarge