Brands
 
Shopping Cart
0 items
 
Specials
 

RV LED Motion Guard Flood Light

RV LED Motion Guard Flood Light
Click to enlarge
Price: $54.00
Availability: 4
Model: LED Motion Guard 1000
Manufacturer: RV LED
Average Rating: Not Rated

Motion Guard 1000® Gen 2 LED Outdoor Motion Activated RV Flood Light with 450 Lumen Light Board

Created by the designer of Smart Light 1000 motion light. This is the second generation of that light with an improved motion sensor, higher light output, EMI supressed 450 lumen LED board. This fixture was designed from the ground up as a curb side LED motion porch light.

From the Manufacturer

MG1000-450™ has an integrated long-life 450 lumen LED Array (Equal to a 40 Watt Light Bulb) in an affordable, energy saving security lighting solution. The Motion Guard 1000 provides maintenance-free general and security illumination for RV outdoor use applications.

Bright, uniform illumination is ideal for camping areas and egress easements creating an inviting exterior space as well as providing safety and security when camping in unfamiliar locations. The MG1000-450™ with the built in photo sensor, will arm and disarm automatically while in Motion Mode, one of the most defining features of the MG1000-450™ is that it is EMI Suppressed so as not to affect your TV or Radio reception when in weak service areas. The fixture has “Polarity Guard™” to ease the difficulty of the installation by correcting the Polarity in the RV automatically if needed. The fixture has “INTELA-SENSOR™” that alerts when the coach battery is at or below 11.5 Volts by blinking a RED led (Fixture is powered by the Coach Battery).

Product Features

  • Two modes of operation: Porch Light Mode and Motion Activated Light Mode
  • Polarity Guard™ equipped
  • Intela- Sensor™ blinks red when the coach battery is at or below 11.5 volts
  • 450 lumen LED array - Equal to a 40 watt incandescent light bulb
  • Only draws .45 amps (45 milliamps) - 5.4 watts
  • Rugged UV Stabilized Polycarbonate white housing
  • Clear UV Stabilized Polycarbonate lens is fully gasketed to keep out moisture, dirt and bugs
  • Fresnel Lens made from High-Density Polyethylene )HDPE) to give long life
  • Operational voltage: 11.6 to 14.4 volt DC
  • Single motion sensor provides 150 degree detection with up to 35 feet forward range
  • User adjustable sensitivity knob provides precision control
  • For outdoor sidewall mounting only - Safe for use in wet locations
  • Patented Pending Design
  • 1 Year manufacturer's warranty against mechanical defects

Replaces

The factory exterior porch light fixture. Easy to install.

Downloads

What's in the Box
1 - Motion Guard 1000
® replacement porch light fixture with clear water proof lens cover. Installation and operating instructions are on the back of the package or can be downloaded at the above link.

Note's from the Installation Team
Recommended Use: Exterior security lighting

RV LED Lites sent me a sample Motion Guard® 1000-450W that I installed on my hunting camper. Let me tell you... this Gen 2 exterior motion porch light ROCKS! It's nearly twice as bright as the Smart Light 1000 on my 5th wheel. The design and construction is much better than the Gen 1 motion light.

The Motion Guard 1000®  is very easy to install. It will only take one hour to remove the existing factory installed light and install the Motion Guard 1000®. Besides a solar system... I fell that the Motion Guard® 1000™ is one of the best inexpensive modifications that one could make to an RV.

The Motion Guard 1000® provides security and safety all with very little power consumption (only 45 milliamp draw per hour). When switched to manual mode (constant on) the Motion Guard 1000® could be left on all night long and it will only pull about 4 to 5 amps of battery compared to 12 amps the factory installed incandescent lamp would use.

The Motion Guard 1000® has a red LED that will flash if your RV has low battery voltage. If you have a solar system on your RV you'll probably never see this red LED. A blue LED flashes during the day to indicate that the light is in motion detect mode. This blue LED is barley visable in daylight. There is also a green LED that flashes at night to indicate the light is in motion detect mode. At night this flashing green LED is pretty bright. I can easily see the flashing green LED from a long ways off. This green flashing LED was kind of handy for navigating back to the camper in the dark! You won't notice the flashing inside of your RV.

If wind blown branches or tall weeds are within the sensing range of the Motion Guard 1000® they will activate the light at night.

I left my Motion Guard 1000® set at the factory default motion detection setting. That setting seemed about perfect on my light. Since I have a solar system on my hunting camper I leave the motion light in detect mode year round. If you don't have a solar system on your RV I'd recommend switching the Motion Guard 1000® off while in storage.

What you need to Acquire
A small tube of clear or white silicone for sealing the outside edge of the Motion Guard 1000® exterior porch light on the RV's exterior wall.

 

RV Solar Store © 2011-2015

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

RV LED Motion Guard Flood Light
Click to enlarge
RV LED Motion Guard Flood Light
Click to enlarge
RV LED Motion Guard Flood Light
Click to enlarge
RV LED Motion Guard Flood Light
Click to enlarge